Two component Epoxy Novolac Phenolic technology based amine cured performance coating. Its a highly crosslinked two component epoxy novolac tank lining, with excellent heat and chemical resistance.
It is suitable for internal lining of storage vessels and process vessels at elevated temperatures. Indopoxy 360TANK is specially designed as an internal lining for offshore, onshore and buried tanks and pipes such as chemical storage, contaminated or process water, concrete bund, fire service lines and drilling mud tanks etc. Well suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.
Colour
Grey
Finish
Matt to Eggshell
Recommended film thickness per coat
Dry Film Thickness
100-200μ in single coat
All surfaces to be coated should be clean, absolutely dry and oil or moisture free before painting application. Oil and grease should be removed by solvent cleaning.
Repair Cases: : Corroded areas should be power tool cleaned to St3 or blast cleaned to Sa2 or better. Existing system should be dry and free from loose paint, salt, grease and other contaminants prior to overcoating.
Application Method
Spray/ Airless Spray/Brush/ Roller
Mixing Ration
5 Part (Base) : 1 Part (Hardener)
Download Brochure